逻辑探针电路图,Logic Probe
逻辑探针电路图,Logic Probe
This circuit is a Logic Probe. It indicates the logic state of the node of any TTL logic circuit. To do that, we have to supply the probe with the same power of the circuit that we want to analyse: same Vcc and same GND. To check the logic level, we must connect the "Test" wire of the probe to the desired node of the circuit that we want to check.
If the level is Low, the probe will display a "zero" (0) and only the green LED will be lighted. If the level is High, the probe will display a "one" (1) and only the red LED will be lighted. If the level is Impedance, the probe will display a nothing and no LED will be lighted. The logic level is "Low" when the "Test" wire is connected to the ground of the circuit (the voltage is between 0V and 2V). The logic level is "Impedance" when the "Test" wire is unconnected (it has no voltage or the voltage is between 2V and 3V). The logic level is "High" when the "Test" wire is connected to the posiTIve supply of the circuit (the voltage is between 3V and 5V).
- •正的逻辑探针电路,Logic Probe Plus2019-01-21
- •Cirrus Logic为移动和专业音频设备带来录音棚级的音频质量2017-02-15
- •Cirrus Logic完成收购欧胜微电子有限公司2014-08-22
- •Cirrus Logic 将收购欧胜微电子有限公司2014-05-05
- •Cirrus Logic拟收购三星供应商Wolfson2014-04-30
- •Cirrus Logic收购知名音频信号处理公司Acoustic Technologies2013-10-10
- •Cirrus Logic新款ADC助力语音应用提升性能2013-07-30
- •Cirrus Logic推出低功耗四通道麦克风模数转换器2013-07-29
- •S2C提供第五代快速SoC原型验证硬件平台2013-05-29
- •Cirrus Logic双通道功率放大器PB63 有效提升测试设备速度2012-04-13