突发通信中Turbo码的FPGA实现
来源:北京理工大学 作者:沈业兵 罗常青 安建平 程波 时间:2010-05-13 10:40
最后,对帧长为128、256、512和1 024四种条件的Turbo码译码器进行了误码率性能测试。测试系统中加入高斯白噪声,数据采用 BPSK调制,译码器5次迭代。测试结果的性能曲线如图5所示。测试结果表明,在信噪比低于4dB的条件下,跳频数传通信系统采用Turbo编译码方案,误码率小于10-5,达到了数据传输可靠性的要求。由于译码器的帧长在64~1 024范围内可变,因此非常适合应用在突发数据通信中的差错控制中。
参考文献
1 Berrou C, Glavieux A, Thitimajshima P. Near shannon limit error-correcting codeing and decoding: turbo codes. in Proc.ICC′93, Geneva, Switzerland, May. 1993:1064~1070
2 Berrou C. Near optimum error correcting coding and decoding-turbo-codes. IEEE Transcations On Communications, 1996;44(10)
3 万 蕾. Turbo码及其在第三代移动通信系统中的应用. 北京理工大学博士学位论文,2001
4 Robertson P, Villebrun E, Hoeher P. A comparison of optimal and suboptimal MAP decoding algorithms operation in the log domain. in Proc.ICC’95,Seattle,WA,June 1995:1009~1013
5 刘东华. Turbo码原理与应用技术. 北京:电子工业出版社,2004
6 Worm A, hoeher P, When N. Turbo-decoding without SNR estimation. IEEE Commmun,2000;(4):193~195
上一篇:在嵌入式设计中降低CPLD的功耗